http://www.allhouseclean.co.uk/wp-content/uploads/2020/07/diynaturalcleaning-1.jpg 667 1000 Ron M. Stanfield http://www.allhouseclean.co.uk/wp-content/uploads/2020/06/logo-4-300x81.png Ron M. Stanfield2020-07-04 09:00:122020-07-06 09:13:157 Easy DIY Cleaning Hacks that are Safe
The need for cleaning every corner of your home can arise anytime. The everyday cleaning process can become a daunting routine at times which requires a break sometimes. Those who cannot afford to housekeep or do not want one usually lookout for smart alternatives. Here are some easy to learn DIY cleaning hacks which can ease off your overwhelming cleaning routine.
Buff surfaces with olive oilOlive oil is usually known for its health benefits, but surprisingly it can also turn into a cleaning agent for your house. It can be effective in cleaning steel items and can scrub out all the dirty spots with ease.
Add lemons or limes over garbageIf you do not have the habit of keeping your garbage out every day, you can use this quick hack to deodorize and clean garbage disposals. Simply cut the lemon into four pieces and put it into the disposal and hopeful it will not stink anymore.
Use vodka for carpet stainsClear vodka can be a great cleaning hack for cleaning up stains from carpets. You can also use white wine to do the same. First, you will need to blot the stain and then pour one of the clear alcohols that you have on the stain. It can work way better than house cleaning products without damaging the carpets.
Use shaving cream for water stainsShaving cream can be an effective ingredient for cleaning water stains from the shower glass. You will simply need to apply shaving cream on the stains and let is sit for 15 minutes. Wipe off with a clean cloth or a wiper for a crystal clear result.
Baking soda/vinegar for cleaning the tubUse this quick tip to clean your bathtub completely. Mix a cup of vinegar and half a cup of baking soda with hot water and pour the entire solution into the tub and allow it to rest for five minutes. Next, you will need to add some more hot water until it is completely full and then release the drain to rinse the tub thoroughly.
Steam microwave with lemon oilYou can use some essential oils to clean your microwave. Add 12-15 drops of lemon oil into a cup with a half cup of water. Let the solution microwave for 5-10 minutes until it condenses and reaches all corners of the inside of the microwave. Next, take a cloth to wipe off the walls for a clean finish.
Use rubber gloves for pet hairIf your vacuum is ineffective in taking out pet hair from your carpet, you can use a pair of rubber gloves to get your work done. Use the gloves to clean down any areas that need extra cleaning. Rubber can be elastic and catch the pet hair that is stuck in the tough spots. Later you can wash the gloves easily underwater.
http://www.allhouseclean.co.uk/wp-content/uploads/2020/06/bce1f2cf-1017-4db3-9d48-87a7c621b210.jpg 720 1280 Ron M. Stanfield http://www.allhouseclean.co.uk/wp-content/uploads/2020/06/logo-4-300x81.png Ron M. Stanfield2020-06-20 11:59:252020-06-20 12:20:05Fixing and Preventing Rainwater Tank Overflow Problems
Screening tanks for protection from the infestation of insects and mosquitoes is now a necessity according to the rules of the council. However, every boon comes with a bane that can drive you mad beyond a certain point. If you own a tank and have installed screening to it, you should be aware of the new problems it can bring. Water could overflow from the top of the tank and land on areas other than through proper drainage system. By not maintaining the screens from being clogged, such serious issues could come your way. Foundations could erode and lead to depletion of the fine soil in your area, or it could also affect your neighbors during the torrential downpours.
Ensuring the supply of high-quality water for your daily needs is necessary so that everyone stays healthy. If you use the water from the unmaintained rainwater tanks for cooking, bathing, and drinking, it could lead to many more issues. So, you must pay attention to these details that keep your water consumption healthy and safe. The process isn’t as hard as you may have conceived it to be. You only need to conduct a general inspection of your strainer, tank, roof, entry points, and gutter every six months and clean out the strainers by fixing any problems with every part of the tank.
If you tank doesn’t have a self-cleaning system, you need to inspect the inside of it every 2-3 years. By doing this, you will be able to find how badly the sediment has built up and accumulated at the bottom of the tank as sludge, which has to be cleaned by yourself or with some expert help. Incorrect overflow of water from the top of your rainwater tank can be prevented if it has been installed correctly. Tank inspections have to be performed routinely to check if the overflow is being fed correctly into the stormwater drainage.
Maintenance of the Rainwater Tank
Fixing Tank Overflow IssuesIdentifying the cause of the problem with your tank is the biggest issue you will come across when fixing the problem. An investigation is required if the tank is facing such issues during downpours. Fixing them can be complicated if you have no basic idea of how the overflow issues affect the tanks.
Incorrect Water InflowThe rate of inflow of water into the tank will be much higher than the overflow if the water is fed through several pipes. Poor installation is the reason for this kind of overflow from the top. A professional who is experienced in repairing the tanks for these issues have to be consulted for these issues; only fully-qualified plumbers could provide you with the best service in such cases.
Gumming Up of Overflow StrainerFine organic matter can gum up the mesh in the screens that were installed to keep insects and mosquitoes away from your tank. Routine inspection of the screens and strainers can help prevent the gumming up. Try not to install fixed strainers to your tank since it can reduce the overflow of water. Screened ”overflow flap valve” can be installed to combat this issue, but these also need to be inspected to ensure that the springs firmly seal the flaps.
http://www.allhouseclean.co.uk/wp-content/uploads/2020/06/00863ccd-129c-481d-a060-3b4e7bb24f44.jpg 1080 1920 Ron M. Stanfield http://www.allhouseclean.co.uk/wp-content/uploads/2020/06/logo-4-300x81.png Ron M. Stanfield2020-06-01 12:03:292020-06-20 12:19:17Main Tank Fittings and Accessories When Plumbing in Your Rainwater Tank
Installing rainwater tanks at home will need some guidance if you don’t want it to make a mess in the future. Having some accessories and fittings as a backup can make your plumbing easier each time there is an issue with the tank. But it is more important that you have the required accessories and fittings with the rainwater tank you buy so that you can save some money on the deal. Here are a few accessories that you need to have when plumbing a rainwater tank into your house.
Standard Fittings for the TankIf you haven’t ordered a tank before, you could be confused as to where the outlet, overflow, and inlet are to be placed. Onsite cutting is preferred most of the time for the accurate fit it ensures, but without the right tool, you might find it difficult to handle. Having the manufacturer to do the cutting before dispensing would be a better idea in such cases to avoid the risk of damaging the tank. The three holes that a rainwater tank consists of are:
- Tank inlet: A hole at the top of the tank with a diameter of about 200mm to 500mm. Strainers are to be fitted here to keep out insects.
- Tank outlet: A ball valve is affixed at the bottom of the tank to connect with the flexible piping. The rainwater can be accessed from this location, and the outlet helps in absorbing shock and ground movement.
- Tank overflow: Excess rainwater is released through this hole at the top of the tank. The water can be fed into your stormwater tank or stormwater drain.